We are a certified metal plating facility, holding accreditations from Nadcap Chemical processing, Nadcap Coatings, Nadcap Nondestructive Testing, ITAR, FAA Repair Station, ISO 13485:2016, ISO 9001:2015, AS9100 Rev D and more. We are capable of assisting with plating for the molds and dies used for creation of medical glasses, gloves and other PPE products. We also can help coat metals used in ventilators, respirators and common medical equipment. Lead time is less than a week.
The suppliers listed below have confirmed the availability of products, materials, or other manufacturing services specific to the current mass shortage of critical supplies.
Add your company to this list
We are a large distributor with the ability to supply materials for the use of producing face shields, gowns, masks, HEPA filters, medical swab assembly, ventilators, and other PPE. Current lead times less than 7 days.
Proud member of the Defense Industrial Base and a critical medical component manufacturer. Manufactures a wide variety of medical components include: cable assemblies, casters, handles, knobs, spring plungers, gaskets, rubber products, magnets and much more. We can supply components used in a wide-variety of devices including ventilators. We also offer custom manufacturing, vast capacity and kitting/assembly. We have Sales Engineers 24/7 to handle any questions.
ISO 9001:2015 certified. We supply parts to help produce the following COVID-19 response equipment: medical UV sterilizing equipment, hand sanitizer containers, respirators and ventilators. We also extruded and slit nylon, HDPE, LDPE, nylon MDS, acetal and polypropylene. If your part is needed in the medical field, we are rushing each order. Most take less than one week, depending on the material needed. Made in the USA.
The company maintains a Quality Management System (QMS) that is AS9100:2016 and ISO 9001:2015 certified. Woman-owned (WBENC) sheet metal forming services. Providing stamping metallic and non-metallic component parts for mechanical ventilators, masks and other systems used to help fight COVID-19.
To help respond to the COVID-19 crisis, we have supplied plastic rivets and fasteners to help secure ventilator hoods as well as make custom hardware kits for hand sanitizing. Made in the USA.
To help respond to the COVID-19 crisis, we are working with our original equipment manufacturers, contract manufacturers and distribution partners globally, to ensure they have the connectors they need to support the medical industry for ventilators, testing and diagnostic equipment. Our engineers are available in real-time for technical support and we have inventory on hand at our global order fulfillment centers. For more information, go to www.edac.net and contact us with your connector requirements.
Wyandotte Industries is a manufacturer of Special Nuts, Screw Machine & CNC Turned Parts and much more. We can supply materials or component parts that can be used in the production of in-demand COVID-19 response related products including N95 respirators, and ventilators. We machine / mill products from bar. We can supply parts to print for many Industries. With our advanced screw machining services, Wyandotte Industries specializes in the manufacturing of bushings, collars, fittings, inserts, and spacers, along with a variety of other products. With our CNC machining services, which include both CNC turning and four-axis milling operations, we manufacture a wide variety of products, such as bushings, collars, machined components, and fasteners. From one-off-prototypes to high volume production runs, our CNC machining operations have met the needs of diverse industries, ranging from alternative energy to construction and electrical. 1-3 week lead time offered.
IATF-Certified custom manufacturer of medical devices and components for healthcare products, including ventilators and N95 respirators. Able to provide stamped and machined metal components as well as assemblies for any metal COVID-19 relief supply.
GGB is a manufacturer of plain bearings and tribological materials that can and have been used in medical devices where movement is needed. During the COVID-19 crisis, we can service customers who manufacture compressors, hospital beds, examination tables, fluid dispensing equipment, medication delivery equipment, dialysis machines, compressor-based ventilators, and more. Where there is a moving part, GGB can help with a solution.
We manufacture a full line of protective caps, plugs and grips that are very commonly used on many of the ventilators, filters, hospital beds/furniture and equipment that are required at this time. We can expedite lead-times and offer discounted pricing to help in the manufacturing of the goods and equipment that is in current demand. Lead time is 1-3 weeks.
We can provide supplies and materials to assist during the demand of COVID-19 response. We are a stainless steel tubing supplier for critical medical devices. We supply parts that are used in ventilators, diagnostic testing systems and other potential life saving devices.
We would like to help save lives with producing springs and wire forms for hospital beds, ventilators and valving springs. Lead times less than a week.
We are suppliers of in demand materials or component parts that can be used in the production of COVID response related products. Products include ventilators. Capabilities include rapid prototyping, 3D printing, manufacturing, and design.
We are ramping up our production of several essential rubber components for ventilator manufacturer Ventec Life Systems. Ventec recently announced plans to partner with GM to increase the output of these crucial units in response to the COVID-19 pandemic.
We provide silicone rubber Manifold Gaskets and EMI Shielding Gaskets for Ventilators and similar Medical Support Equipment in support of the COVID-19 crisis. We provide silicone foam and closed cell silicone sponge Gasket Tape with adhesive backing for isolation rooms and clean rooms. We have water jet prototyping capabilities to cut custom silicone rubber gaskets to help innovators try out a new design concept. We have a broad selection of silicone rubber materials from .010" thick to .500" thick to support sampling and prototyping concepts and production. We also provide supplies and materials related to COVID-19, and offer services including design to specs., rapid prototyping, and manufacturing.
We provide specialty heating and cooling products for a variety of applications, including medical equipment pharmaceutical or biopharmaceutical applications and industrial products. Our cooling fans and blowers are also supplied to OEM manufacturers of ventilator and respirator equipment that aid in the COVID-19 priority response. We are flexible in manufacturing and quick to respond to customer small or large scale requirements.
We build precision sheet metal parts for other companies that make ventilators, respirators, and other medical products for use in response to the COVID-19 crisis.
For the production of in demand COVID response related products, we can supply materials or component parts. Open capacity in our assembly department to assemble face shields. Metal stamping capacity to make parts for ventilators and respiratory. 1-3 week lead time offered.
We continue to make respirator-style masks for world-leading mask suppliers and medical companies.We also made silicone parts this year for Ford's ventilator builds in the fight against COVID.
We can supply threaded inserts for plastics (used in respirators, ventilators, left ventricle assist systems (LVAS), portable defibrillators, biohazard boxes, needle disposal boxes, vacuum pump housings, MRI catchment trays, surgical blade holders), compression limiters (used in mounting lead shield in CAT scanners, vacuum pump housings, medical device housings), coiled spring pins (used in respirators / ventilators, hospital beds, exam tables, surgical devices, articulating hinges in surgical tools, test tube centrifugal devices), slotted spring pins (used in respirators / ventilators, hospital beds, exam tables, surgical devices), solid pins (Used in surgical devices, articulating hinges in surgical tools), spacers (used in hospital trolley wheels, surgical devices, conveyors, wheel chairs, medical chair arm rests) and shims (used in respiratory ventilators.)
We make a wide variety of precision orifices used to control flow rate of air and other gases in ventilators, anesthesia and respiratory therapeutic devices. We are open for business and welcome you inquiries. Lead time is less than a week.
We are making plexiglass and Lexan sneeze guards along with clear PETG face shields. We can also fabricate rubber or plastic needs including tubing, machined Delrin acetal components for ventilators, wall partitions between beds and face masks. Lead times under 7 days.
Our custom manufactured, cold headed metal parts and fasteners can be used in many in-demand COVID-19 components. We produce high temperature precious metal tips that are used in the fiber manufacturing of HEPA filters. Our other components can be used in medical devices, electrical testing equipment, ventilators, and more. ISO 9001:2015 certified and made in the USA.
Manufacturer of Balancing Machines and Equipment utilized in the Manufacturing Process of Ventilators. Batch Balancing Service Provider for all rotating components Balancing Services and rotating components on a Ventilator or Respirator in response to COVID-19.